Skip to content

BEAMSHIELD® Suspended Floor Insulation

Beamshield Top Sheet and Beamshield Plus systems for use as thermal insulation in suspended concrete ground floors are available in white or PLATINUM® EPS to give higher insulation value where needed.

Beamshield EPS insulation units replace the concrete blocks to provide total floor insulation and a layer on which to lay the structural concrete topping. For details of the structural concrete toppings in our Agrément certificates please visit our download section.

Beamshield Plus units have the extended toe section to insulate below the beams, whilst the Beamshield Top Sheet infill units are designed to be used with the top sheet to provide improved Psi-value junction detail, by way of a continuous layer of insulation above the beams.

Beamshield Plus units can also be used with the Top Sheet, if required, to provide insulation both above and below the beam to maximise the thermal insulation potential of the ground floor.

The Installation Guide

BEAMSHIELD® Installation Guide

Working with Beamshield? Download our latest Beamshield installation guide to ensure your Springvale products are installed safely, quickly and correctly.

Get The App

BEAMSHIELD® App

Get access to our installation demo videos and our product specification. Available now for download.

Save time. Save Money.

BEAMSHIELD® Suspended Floor Insulation

Beamshield Top Sheet and Beamshield Plus systems for use as thermal insulation in suspended concrete ground floors are available in white or PLATINUM® EPS to give higher insulation value where needed.

Beamshield EPS insulation units replace the concrete blocks to provide total floor insulation and a layer on which to lay the structural concrete topping. For details of the structural concrete toppings in our Agrément certificates please visit our download section.

Beamshield Plus units have the extended toe section to insulate below the beams, whilst the Beamshield Top Sheet infill units are designed to be used with the top sheet to provide improved Psi-value junction detail, by way of a continuous layer of insulation above the beams.

Beamshield Plus units can also be used with the Top Sheet, if required, to provide insulation both above and below the beam to maximise the thermal insulation potential of the ground floor.

Get The App!

BEAMSHIELD® App

Get access to our installation demo videos and our product specification. Available now for download!

Save time. Save Money.

BEAMSHIELD® Top Sheet Infill System

Starter / End Unit

Full Width Unit

Half Width Unit

Variable Width Board

Top Sheet

The Beamshield Infill Units are used in conjunction with the Beamshield Top Sheet. Beamshield Infill Top Sheet system comprises 5 components in either White or Platinum EPS, with the Platinum grade giving an improved thermal performance.

The components are made up of Starter / End units, Full units, Half units, Variable Width Boards and Top Sheets.

The End Units in the Beamshield Infill range are used for both the start and end of the Beamshield system installation.

The Variable Width Boards (VWB) can be used with Beamshield Infill units in conjunction with the Beamshield Top Sheet and are used to suit beam spacing of no wider than 350mm. Variable Width Boards can be supplied as a bespoke board or cut from Beamshield Top Sheets providing the Top Sheet thickness is between 75mm and 100mm.

The Beamshield Infill units and Variable Width Boards are 1200mm long and may be cut (to a minimum of 300mm length) to accommodate varying beam lengths and should be positioned at the floor edges.

Beamshield Top Sheets EPS Units measure 2400 x 1200mm and are available in either White or Platinum EPS, with the Platinum grade giving an improved thermal performance.

Easy to Install

For easy identification each unit has been colour coded within the pack:

  • Starter / End Unit – White
  • Full Width Unit – Blue
  • Half Width Unit – Yellow
  • Variable Width Board (VWB) – Green
  • Top Sheet – Green

For Beamshield Top Sheet installation details please click here.

Easy to Install

For easy identification each unit has been colour coded within the pack:

  • Starter / End Unit – White
  • Full Width Unit – Blue
  • Half Width Unit – Yellow
  • Variable Width Board (VWB) – Green
  • Top Sheet – Green

For Beamshield Top Sheet installation details please click here.

The Installation Guide

BEAMSHIELD® Installation Guide

Working with Beamshield? Download our latest Beamshield installation guide to ensure your Springvale products are installed safely, quickly and correctly.

BEAMSHIELD® Installation Guide

For more information and a step by step guide for both our Top Sheet and Plus systems please download our Beamshield Installation Guide.

BEAMSHIELD® Installation Guide

For more information and a step by step guide for both our Top Sheet and Plus systems please download our Beamshield Installation Guide.

BEAMSHIELD® Top Sheet Plus System

Starter Unit

Full Width Unit

Half Width Unit

Variable Width Board

End Unit

Top Sheet

When Beamshield Plus Units are used in conjunction with the Beamshield Top Sheet, the combination of insulation above, between and below the concrete beams enables excellent U Values to be achieved without excessive insulation depths above the beams.

Beamshield Plus Top Sheet system comprises 6 components in either White or Platinum EPS, with the Platinum grade giving an improved thermal performance.

The components are made up of Starter units, Full units, Half units all available with extended toes to accommodate Double and Triple T-Beam layouts. The Variable Width Boards, End units and Top Sheets complete the system.

The Variable Width Boards (VWB) can be used with Beamshield Plus units in conjunction with the Beamshield Top Sheet and are used to suit beam spacing of no wider than 350mm. Variable Width Boards can be supplied as a bespoke board or cut from Beamshield Top Sheets providing the Top Sheet thickness is between 75mm and 100mm.

The Beamshield Plus units and Variable Width Boards are 1200mm long and may be cut (to a minimum of 300mm length) to accommodate varying beam lengths and should be positioned at the floor edges.

Beamshield Top Sheets EPS Units measure 2400 x 1200mm and are available in either White or Platinum EPS, with the Platinum grade giving an improved thermal performance.

A Great Combination

For easy identification each unit has been colour coded within the pack:

  • Starter Unit – Red
  • Full Width Unit – Blue
  • Half Width Unit – Yellow
  • Variable Width Board (VWB) – Green
  • End Unit – White
  • Top Sheet – Green

For Beamshield Top Sheet installation details please click here.

A Great Combination

For easy identification each unit has been colour coded within the pack:

  • Starter Unit – Red
  • Full Width Unit – Blue
  • Half Width Unit – Yellow
  • Variable Width Board (VWB) – Green
  • End Unit – White
  • Top Sheet – Green

For Beamshield Top Sheet installation details please click here.

BEAMSHIELD® Plus System

Starter Unit

Full Width Unit

Half Width Unit

End Unit

The original Beamshield Plus system is designed be used as a stand-alone system and cannot be used with the Variable Width Board and Top Sheet components. For our Top Sheet systems please see above.

Beamshield Plus system comprises 4 components in either White or Platinum EPS, with the Platinum grade giving an improved thermal performance.

The components are made up of Starter units, Full units, Half units; all available with extended toes to accommodate Double and Triple T-Beam layouts and the End units complete the system.

The Beamshield Plus units are 1200mm long and may be cut (to a minimum of 300mm length) to accommodate varying beam lengths and should be positioned at the floor edges.

A Stand-alone System

For easy identification each unit has been colour coded within the pack:

  • Starter Unit – Red
  • Full Width Unit – Blue
  • Half Width Unit – Yellow
  • End Unit – White

For Beamshield Plus installation details please click here.

A Stand-alone System

For easy identification each unit has been colour coded within the pack:

  • Starter Unit – Red
  • Full Width Unit – Blue
  • Half Width Unit – Yellow
  • End Unit – White

For Beamshield Plus installation details please click here.

Available T-Beam Sizes

Springvale work alongside T-Beam manufacturers nationwide who can design a Beamshield floor system with a wide range of different T-Beams. For more information on T-Beams and any other related enquiries please contact your area manager and they will be happy to help.